Mileage blocker VW ID.3

Description

The mileage blocker VW ID.3 stops the kilometers in ALL memory locations and ALL control units. The module does not have to be reset each time, because it stores the last selected setting.

Our mileage blocker VW ID.3 have the following advantages:

• simple and fast installation, as the module does not need to be programmed
• Programming takes place automatically through Plug & Play
• Module is simply activated and deactivated via key combination
• No interferences in the electronics, because German branded product (no China goods!!!)
• Cruise control, speed limit and other technicians work perfectly

Due to our own patented development we are able to offer you different options for the activation of the speedo stopper.

The following setting options are available for this module:

• Mode 1: Press the high beam switch 5 times (speed display in the instrument cluster shows 1 time 5 km/h) = odometer stops (after 100 km 0 km is displayed), speedometer functions normally
• Mode 2: Press the high beam switch 5 times (speed display in the instrument cluster shows 2 times 5 km/h) = odometer freezes 10% (after 100 km 10 km are displayed), speedometer functions normally
• Mode 3: Press the high beam switch 5 times (the speed display on the instrument cluster shows 5 km/h 3 times) = back to normal mode, odometer and speedometer function normally.

After ignition OFF/ON, the speedometer stopper retains the selected operating mode.

If you remove the speedometer stopper after the test drive, the odometer will not change.